Installing The New 3.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

Figure 79: Removing the 3.5-inch HDD backplane
Ê Pull the HDD backplane upward until the three hooks disengage (see
circles).
Ê Take out the HDD backplane.
7.3.5.3

Installing the new 3.5-inch HDD backplane

Figure 80: Installing the 3.5-inch HDD backplane
Ê Position the HDD backplane on the three hooks (see circles).
Ê Push the HDD backplane downward. Make sure that the lower cant of the
HDD backplane fits in the guides (A).
V
CAUTION!
Ensure that none of the cables are strained or damaged!
RX2530 M1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
153