Cleaning The Automatic Document Feeder Rollers - Sharp MX-C382SC Operation Manual

CLEANING THE AUTOMATIC DOCUMENT
FEEDER ROLLERS
If you find that originals fed through the automatic document feeder misfeed or are soiled by the rollers, remove the
rollers and clean them. If misfeeds or soiling continue to occur, replace the rollers.
Before starting, remove any originals from the automatic document feeder.
1
2
3
Caution
When cleaning the rollers, be careful not to injure your hands.
Do not touch the surface of the roller if your hands are dirty.
• If the dirt is difficult to remove, moisten the cloth with water or a neutral detergent. After wiping, wipe the roller dry
with a clean cloth and go to the step 10.
• When you replace roller, go to the next step.
BEFORE USING THE MACHINE
Press the [POWER] key (
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
Open the document conveyor cover on
the automatic document feeder.
To clean the removed rollers, wipe each
roller with a clean cloth.
1-68
) on the
Contents