Printing On Envelopes - Sharp MX-C382SC Operation Manual

PRINTING ON ENVELOPES

1 Place paper in the bypass tray.
2 Tray Settings.
Tray Settings
Type
Envelope
Size
Paper Property
Fixed Paper Side Disable Duplex
Feeding Approved Job
Copy Print
3 Select settings in the printer driver.
(1)
The procedure for printing on an envelope is explained below. Only the name and
address side of an envelope can be printed on.
It is recommended that you do a test print to check the print result before using an
envelope.
Back
Bypass
Change
5
DL
5
Disable Staple
Fax I-Fax Doc. Filing
(2)
(4) (3)
Print on the name
and address side
Type : Envelope
Size : Select the envelope size
(1) Select the size of the envelope in "Paper
Size".
(2) Select "Bypass Tray" from "Paper Source"
in "Paper Selection".
(3) Select [Envelope] in "Paper Type".
If needed, select the "Rotate 180 degrees" checkbox (
in "Image Orientation" on the [Main] tab.
(4) Click the [OK] button.
8-7
TROUBLESHOOTING
)
Contents