Checking A Preview Image Of A Copy (Preview) - Sharp MX-C382SC Operation Manual

CHECKING A PREVIEW IMAGE OF A COPY
(Preview)
You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview
image of the copy in the touch panel before printing the copy.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
• Place the original in the automatic document feeder.
☞
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER
Colour Mode
Full Colour
Exposure Exposure
Auto Auto
2
Copy Ratio Copy Ratio Original Original
100% 100%
Upper Exit
Select copy settings and press the [START] key.
3
After the original is scanned, a preview image of the copy appears in the touch panel. The copy is not printed until the [Start
Copy] key is touched in the preview screen.
Preview
4
0001
If you need to change the copy settings, touch the [Reset] key.
To cancel copying...
Press the [STOP] key (
Special Modes Special Modes
2-Sided Copy 2-Sided Copy
Plain
A4
Output Output
A4
1.
A5 File File
2.
A4
3.
A4
4.
Quick File Quick File
Paper Select Paper Select
Auto Auto Auto
A4 8½x11 A4
Preview
Preview
Plain Plain
Reset
Colour Colour
Display Output
Function Rev.
Display Rotation
Start Copy
/0010
).
(page 1-36)
Touch the [Preview] key so that it is
highlighted.
Check the preview image and then touch
the [Start Copy] key.
Copy printing begins.
For details on the preview screen, see
(page 2-110).
2-108
COPIER
"PREVIEW SCREEN"
Contents