Sharp MX-C382SC Operation Manual page 198

Paper Select
Paper Tray
7 1. A4
2. A5
3. A4
4. A4
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If the originals were placed in the document feeder tray, the originals are copied.
• If you placed the originals on the document glass, scan each page one page at a time.
When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
8
press the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
first original. )
To cancel scanning of the original and copying...
Press the [STOP] key (
Enter the paper size of the bypass tray
When the [Custom Size] key is touched, the paper size entry screen appears.
Bypass Tray Type/Size Setting
Size Input
X297 Y210
X
X297 Y210
Y
X297 Y210
• You can also touch the
• Stored custom paper sizes appear in the keys on the left side of the screen. Custom paper sizes are stored in the system
settings. For details, see
wish to enter appears, touch that key.
(1) (2)
OK
Bypass Tray
A4
Plain
Plain
Plain
Plain
Plain
).
OK
OK
297
(148~356)
AB
mm
210
Inch
(100~216)
mm
keys to change the number.
"Paper Tray Settings" (page 7-14) in "7. SYSTEM SETTINGS". If the key for the size that you
Select the bypass tray.
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
Touch the X (width) numeric value display key to open a
number entry screen. Enter the width of the paper with
the numeric keys, and touch the [OK] key in the number
entry screen.
Touch the Y (height) numeric value display key to open a
number entry screen. Enter the height of the paper with
the numeric keys, and touch the [OK] key in the number
entry screen.
2-40
COPIER
Contents