Original Sizes; Specifying The Original Size - Sharp MX-C382SC Operation Manual

ORIGINAL SIZES

SPECIFYING THE ORIGINAL SIZE

The original size is set in "Default original size setting" in the system settings (administrator), and the setting appears in
the [Original] key. This section explains the procedure for specifying the setting when the original size is different from
size shown in the [Original] key.
Touch the [Original] key and perform the following.
Specifying an AB original size
(1)
Original
Original Exit
Upper Exit
Place
A5 216x330
B5 216x340
A4 216x343
Size Input
Specifying an inch original size
(2)
Original
Original Exit
Upper Exit
Place
5½x8½ 8½x14
8½x11 8½x13 2
5
8½x13
Size Input
• System Settings (Administrator): Default original size setting
Set this if you frequently use a particular original size. The set size will appear in the [Original] key.
When this setting is configured, changing the original size can be omitted.
• System settings (Administrator): Setting of Default Original Exit Place
When the automatic document feeder is used, the original's default output destination can be set to the upper exit or the
heavy exit. (Except when "Size Input" or "Card Size" is selected for the original size.)
• In the situations below, the original exit place is fixed to the heavy exit.
- When "Card Size" is selected
- When the original guide is set to 74 mm (2-7/8") or lower (Except when "Check Size" is selected)
- When the automatic document feeder is scanning an original with an X (horizontal) value of 105 mm (4-1/8") or less
• When "Card Size" is selected, you cannot copy if the original guide is set to 74 mm (2-7/8") or higher.
(2) (3)
OK
Heavy Exit
16K
AB
Check Size
Inch
Card Size
Custom Size None
(1) (3)
OK
Heavy Exit
AB
Check Size
Inch
Card Size
Custom Size None
(1) The original output destination for the
automatic document feeder can be
selected.
(2) Touch the appropriate original size key.
When a card size original is set in the
automatic document feeder, the card size can
be selected.
(3) Touch the [OK] key.
(1) Touch the [AB
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
2-30
COPIER
Inch] key.
Contents