Cleaning The Document Glass And Automatic Document Feeder - Sharp MX-C382SC Operation Manual

CLEANING THE DOCUMENT GLASS AND
AUTOMATIC DOCUMENT FEEDER
If the document glass or document backplate sheet becomes dirty, the dirt will appear as dirty spots, coloured lines, or
white lines in the scanned image. Always keep these parts clean.
Wipe the parts with a clean, soft cloth.
If necessary, moisten the cloth with water or a small amount of neutral detergent. After wiping with the moistened cloth,
wipe the parts dry with a clean dry cloth.
Document glass
When wiping dirt off the machine, do not press down hard on the machine. This may damage or deform the machine.
Scanning area
Before using the automatic document feeder, please clean the glass surface with the provided glass cleaner.
If dirt on the glass cannot be removed, wipe it off using a soft cloth moistened with water or a neutral detergent, then
wipe it dry with a dry cloth.
Dirt streaks may appear on copies caused by dirty glass in the scanning area.
Scanning glass
BEFORE USING THE MACHINE
Document backplate sheet
1-62
Provided glass
cleaner
Contents