Table of Contents
Advertisement
Cleaning the Printer
• When you clean printer, use the cleaning materials designated in every step.
• To wipe with a wet cloth, use the soft cloth tightly wrung out of water. If the parts are not
completely dry, the printer may malfunction.
• Using commercially available non-woven dry type fabric is effective for cleaning paper dust.
Choose Non-woven fabric with soft and highly adsorptive that can easily wipe dirt and dust off.
Do not use non-woven fabric containing organic solvents or a polishing agent.
• Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or
coating on plastic parts.
Note
After cleaning, be sure to close the cover. Leaving the cover open will not be able to continue to jobs.
Running Paper
Cleaning may temporarily cause a number of white dots to appear on the output. After cleaning,
feed paper through the machine to ensure effectiveness of the cleaning.
1.
Create image data consisting C100% and M100% for SRA3 or A3 size.
2.
Run a 2-sided job to print this image on about 20 sheets of paper.
Cleaning the Exterior
1.
Wipe the exterior with a firmly wrung soft cloth moistened with water.
If dirt does not come off easily, try gently wiping with a soft cloth moistened with a small amount of
neutral detergent.
Note
Do not use cleaning agents other than water or neutral detergent.
2.
Wipe off any excess water with a soft cloth.
47
Maintenance
Advertisement
Table of Contents
