Initialize - Subaru Forester 2016 Owner's Manual

4. The current setting will be displayed.
Pull the /SET switch toward you to
enter the selection mode.
5. Select the preferred setting by operat-
ing the or switch, and then pull
the /SET switch toward you.
6. Select Set by operating the
switch, and confirm the setting by pulling
the /SET switch toward you.
7. The system will notify you that the
setting is complete.
If the setting is not available, the following
Instruments and controls/Multi function display
notification will be displayed. In this case,
perform the setting procedure again.
Approaching time setting
The setting procedure is the same as
Leaving time setting
the Approaching time set item in step 3.

Initialize

Items that have been set to your pre-
ference can be initialized. To select an
initialization menu, operate the
switch as follows.
Preparation for initialization
1. Turn the ignition switch to the ON
position.
2. Pull and hold the
toward you to show the selection screen.
3-81
3-80, but select
or
/SET switch
CONTINUED