Selecting Audible Signal Operation; Warning Chimes And Warning Light; Disabling Keyless Access Function - Subaru Forester 2016 Owner's Manual

2-16
Keys and doors/Keyless access with push button start system
Door unlock selection function
The door unlock selection function makes
it possible to unlock the driver s door or
the rear gate without unlocking any other
doors. You can change the setting for the
driver s door and for the rear gate inde-
pendently.
Operational: Only the driver s door or the
rear gate will be unlocked.
Non-operational: All doors and the rear
gate will be unlocked.
For the factory setting (default setting),
refer to Function settings
NOTE
The setting can be changed by your
SUBARU dealer. Contact your SUBARU
dealer for details. Also, for models with
the multi function display, the setting
can be changed by operating the multi
function display. For details, refer to
Keyless access setting (models with
keyless access with push-button start
system ) 3-77.
Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
NOTE
For models with the multi function
display, the setting can be changed by
operating the multi function display.
For details, refer to
volume setting
23.
Warning chimes and warning
light
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning light on
the combination meter in order to minimize
improper operations and help protect your
vehicle from theft.
For details, refer to Warning chimes and
warning light of the keyless access with
push-button start system
If you wear an implanted pacemaker
or an implanted defibrillator, operate
the driver s door to disable the
keyless access function. Otherwise,
the operation of an implanted pace-
maker or implanted defibrillator may
be affected by the radio waves from
the transmitter antenna.
Keyless buzzer
3-72.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the
keyless access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. The setting can also be changed at
SUBARU dealers. For more details,
contact a SUBARU dealer.
. To start the engine while the func-
3-23.
tions are disabled, perform the proce-
dure described in
9-18.
. We recommend that you disable the
keyless access functions under the
Disabling keyless access
function
WARNING
Starting engine