Rear Window Wiper And Washer Switch - Subaru Forester 2016 Owner's Manual

3-94
Instruments and controls/Wiper and washer
NOTE
The windshield washer fluid warning
light illuminates when the washer fluid
level in the tank has dropped to the
lower limit. If the warning light illumi-
nates, refill the tank with fluid. For the
refilling procedure, refer to
shield washer fluid 11-32.
Rear window wiper and
washer switch
: Washer (accompanied by wiper op-
eration)
: Continuous
: Intermittent
Wind-
: Off
Washer (accompanied by wiper op-
:
eration)
Rear wiper
To turn the rear wiper on, turn the knob
switch upward.
To turn the wiper off, return the knob
switch to the position.
With the switch turned to the
tion, the rear wiper will operate intermit-
tently at intervals corresponding to the
vehicle speed. In this position, when you
move the select lever to the R position
(CVT models) or the shift lever to the
reverse position (MT models), the rear
wiper will switch to continuous operation.
When you move the select lever/shift lever
from the R (reverse) position to another
position, the rear wiper will return to
intermittent operation.
CAUTION
Do not attach anything that disturbs
the rear wiper operation on the rear
gate. Doing so may damage the rear
wiper when it operates.
NOTE
Even if the rear wiper switch is in the
position, while the shift lever/
select lever is in the R position with
the windshield wiper operating con-
tinuously, the rear wiper will operate
intermittently.
Washer
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the
posi-
fluid sprays until you release the knob.
position. The washer