3-70
Instruments and controls/Multi function display
6. The system will notify you that the
setting is complete.
Clear setting
1. Perform the preparation steps accord-
ing to Preparation for maintenance set-
tings
3-67.
2. Operate the
or
select the Clear All Settings item. Then
pull the
/SET switch toward you.
3. The system will prompt a Yes/No
dialogue ( No is selected first). To clear
all maintenance settings, select Yes by
operating the
switch to
4. Confirm the setting by pulling the
SET switch toward you.
5. The system will notify you that the
setting is complete.
switch.
/