Initialize - Subaru WRX Owner's Manual

3-94
Instruments and controls/Multi function display
Approaching time setting
The setting procedure is the same as
Leaving time setting 3-92, but select
the Approaching time set item in step 3.

Initialize

Items that have been set to your pre-
ference can be initialized. To select an
initialization menu, operate the
switch as follows.
Preparation for initialization
1. Turn the ignition switch to the ON
position.
2. Push and hold the button to show
the selection screen.
3. After the selection screen is displayed,
operate the or switch to show the
Initialize item. Then, push the
Reset to factory default settings
1. Perform the preparation steps accord-
ing to Preparation for initialization
94.
or
2. Operate the
select the Reset to Defaults item. Then
push the button.
button.
3-
3. The system will prompt a Yes/No
dialogue ( No is selected first). To return
to the factory default settings, select Yes
by operating the
or switch to
4. Confirm the setting by pushing the
button.
switch.