Security Indicator Light; Key Replacement; Certification For Immobilizer System - Subaru Forester 2016 Owner's Manual

2-4
Keys and doors/Immobilizer
Ignition switch (models without push-
button start system) 3-3.
CAUTION
. Do not place the key under direct
sunlight or anywhere it may
become hot.
. Do not get the key wet. If the key
gets wet, wipe it dry with a cloth
immediately.
NOTE
To protect your vehicle from theft,
please pay close attention to the fol-
lowing security precautions:
. Never leave your vehicle unattended
with its keys inside.
. Before leaving your vehicle, close all
windows and the moonroof, and lock
the doors and rear gate.
. Do not leave spare keys or any
record of your key number in the
vehicle.
. The vehicle has a maintenance-free
type immobilizer system.

Security indicator light

Refer to Security indicator light

Key replacement

Your key number plate will be required if
you ever need a replacement key made.
Any new key must be registered for use
with your vehicle s immobilizer system
before it can be used. The maximum
number of keys that can be registered
for use with one vehicle is as follows.
. Four (models without keyless access
with push-button start system )
. Seven (models with keyless access
with push-button start system )
One key that has already been registered
is required in order to register a new key.
If you lose a key, the lost key s ID code still
remains in the memory of the vehicle s
immobilizer system. For security reasons,
the lost key s ID code should be erased
from the memory. To erase the lost key s
ID code, all keys that will be used are
required.
For details about new key registration and
erasing the lost key s ID code, contact
your SUBARU dealer.
3-28.
Certification for immobilizer
system
. For models with
keyless access
with push-button start system :
Refer to Certification for keyless access
with push-button start system
. For models without keyless access
with push-button start system :
U.S.-spec. models
FCC ID: MOZRI-38BFH
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user s authority to operate the
equipment.
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions: (1) This
device may not cause harmful inter-
ference, and (2) this device must
accept any interference received, in-
cluding interference that may cause
undesired operation.
2-18.