Voice Command System Operation; Voice Command System - Subaru Forester 2016 Owner's Manual

5-106
Audio/Voice command system operation
Voice command system op-
eration

Voice command system

The voice command system enables the
audio, hands-free systems, etc. to be
operated using voice commands.
Refer to the Command list
samples of voice commands.
Using the voice command system
Steering switch
1 Talk switch
. Press the talk switch to start the voice
command system.
. To cancel voice recognition, press and
hold the talk switch.
Microphone
5-109 for
1) Models without SUBARU STARLINK
2) Models with SUBARU STARLINK
(U.S.-spec. models only)
. It is unnecessary to speak directly into
the microphone when giving a command.
NOTE
. Wait for the confirmation beep be-
fore speaking a command.
. Voice commands may not be recog-
nized if:
Spoken too quickly.
Spoken at a low or high volume.
The roof or windows are open.
Passengers are talking while
voice commands are spoken.
The air conditioning speed is set
high.
The air conditioning vents are
turned towards the microphone.
. In the following conditions, the sys-
tem may not recognize the command
properly and using voice commands
may not be possible:
The command is incorrect or
unclear. Note that certain words,
accents or speech patterns may be
difficult for the system to recognize.
There is excessive background
noise, such as wind noise.