Subaru Forester 2016 Owner's Manual page 337

Using aha application
If you connect a smartphone to this
system after starting a supported aha
application on the smartphone, you can
display and operate the aha application
displayed on the smartphone on the
system screen.
NOTE
. Connect a smartphone to the USB
port before turning the ignition switch
to the ACC or ON position.
. When it is not played back normally,
press the POWER/VOLUME knob twice
while a USB cable is connected.
1. Run the aha application on your
smartphone.
2. Connect the iPhone/iPod touch to the
USB port or connect the Android device
by utilizing the Bluetooth connection (SPP
and A2DP profile).
. For details about connecting an
iPhone/iPod touch: Refer to Connect-
ing and disconnecting a USB memory/
portable device 5-5.
. For details about registering or con-
necting an Android device: Refer to
Registering/connecting Bluetooth
device 5-80.
Press AUDIO/TUNE knob twice to switch
between iPhone and Android.
3. Select aha on the Select Audio
Source (Select Audio Source) screen.
Refer to Basic operation
Select aha on the Apps (APPS) screen.
Refer to STARLINK 5-29.
4. Check that the top screen is displayed.
5. Select the desired station.
6. Check that the station operation
screen is displayed.
®
Audio/Media operation
5-11.
. Main functions of the station opera-
tion screen button: Refer to Station
operation screen buttons
. For details on the services or the
operations, check the aha site
(http://www.aharadio.com) on the in-
ternet.
NOTE
. When iPhone/iPod touch and An-
droid devices are connected at the
same time, iPhone/iPod touch is prior-
itized.
. The following operations are not
available on this system. Perform these
operations on the smartphone.
Add/Reorder/Delete stations
Login to Facebook/Twitter
5-71
5-72.
CONTINUED