Initialize - Subaru Impreza 2016 Owner's Manual

3-86
Instruments and controls/Multi function display
3. The current setting will be displayed.
Push the button to enter the selection
mode.
4. Select the preferred setting by operat-
ing the or switch. Then push the
button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the button.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.

Initialize

Items that have been set to your pre-
ference can be initialized. To select an
initialization menu, operate the
switch as follows.
Preparation for initialization
1. Turn the ignition switch to the ON
position.
2. Push and hold the button to show
the selection screen.
or