Initialize - Subaru Forester 2017 Owner's Manual

3-90
Instruments and controls/Multi function display
6. Select Set by operating the
switch, and confirm the setting by pushing
the
button.
7. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Approaching time setting
The setting procedure is the same as
Leaving time setting 3-89, but select
the Approaching time set item in step 3.

Initialize

Items that have been set to your pre-
ference can be initialized. To select an
initialization menu, operate the
switch as follows.
Preparation for initialization
1. Turn the ignition switch to the ON
position.
2. Push and hold the button to show
the selection screen.
3. After the selection screen is displayed,
operate the or
Initialize item. Then, push the
Reset to factory default settings
1. Perform the preparation steps accord-
ing to Preparation for initialization
90.
or
switch to show the
button.
3-