Subaru Forester 2016 Owner's Manual page 216

3-74
Instruments and controls/Multi function display
5. Select Set by operating the
switch, and confirm the setting by pulling
the /SET switch toward you.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Defogger setting
1. Perform the preparation steps accord-
ing to Preparation for car settings
2. Operate the or
select the Defogger item. Then pull the
/SET switch toward you.
3. The current setting will be displayed.
Pull the /SET switch toward you to
3-72.
enter the selection mode.
switch to
4. Select the preferred setting by operat-
ing the or switch. Then pull the