Settings Data/Backing Up Or Restoring Logs [Data] - Panasonic WV-SFR631L Operating Instructions Manual

•
The notification function allows users to provide the notification of the error to the specified destination
E-mail address and an original alarm destination when an error such as no SD memory card insertion
after the reboot or a locked SD memory card insertion occurs. (®page 148, page 130)
18.5 Settings data/backing up or restoring logs
[Data]
Click the [Data] tab of the "Maintenance" page. (®page 40, page 42)
The setting related to settings data and backing up or restoring logs can be configured in this section.
Backup
•
[Setup data]
Click the [Execute] button to backup the setup data of the camera to a PC.
•
[Scene file]
Click the [Execute] button to backup the scene files of the camera to a PC.
•
[Logs]
Click the [Execute] button to backup the log data of the camera to a PC.
Restore
•
[Setup data]
Press the [Browse...] button and select the setup data files to restore.
Click the radio button respective to the desired option to determine whether or not to also restore network
related setting contents.
Click the [Execute] button to start restoring. Do not perform operations until the restoration is complete.
(The camera will be rebooted when the restoration is complete.)
Make sure to set the file name of setup data files used when restoring to "model name.dat". (The model
name must be written in lower case letters and "WV-" is not needed.)
•
[Scene file]
Press the [Browse...] button and select the scene files to restore.
Click the [Execute] button to start restoring. Do not perform operations until the restoration is complete.
18 Maintenance of the camera [Maintenance]
Operating Instructions 191