Panasonic WV-SFR631L Operating Instructions Manual page 48

10 Configure the basic settings of the camera [Basic]
[Camera title on screen (0-9, A-Z)]
Enter a character string to be displayed on the image.
•
Available number of characters: 0 - 20 characters
•
Available characters: 0-9, A-Z and the following marks.
! " # $ % & ' ( ) * + , - . / : ; = ?
•
Default: None (blank)
[OSD] - [Position]
Select the position where the time and date and a character string to be displayed on the image of the "Live"
page.
•
Upper left: The above information will be displayed at the upper left corner of the main area on the
"Live" page.
•
Lower left: The above information will be displayed at the lower left corner of the main area on the
"Live" page.
•
Upper right: The above information will be displayed at the upper right corner of the main area on the
"Live" page.
•
Lower right: The above information will be displayed at the lower right corner of the main area on the
"Live" page.
•
Default: Upper left
[Brightness status display]
Select "On" or "Off" to determine whether or not to display the status of brightness on images displayed on the
"Live" page when adjusting brightness.
•
Default: On
[Upside-down]
Select "On" or "Off" to determine whether or not to turn the image upside-down.
•
Default: Off
[Indicator]
Determine whether or not to use the following indicators. Select "On" to use the following indicators to check
the operational status by lighting them. Select "Off" to turn off the indicators at all times.
–
Link indicator (LINK)
–
Access indicator (ACT)
–
SD memory card error indicator/AF indicator (SD ERROR/AF)
–
SD MOUNT indicator (SD MOUNT)
•
Default: On
Note
•
Link indicator (LINK) (orange): This indicator will light when communication with the connected device
is available.
•
Access indicator (ACT) (green): This indicator will blink when accessing a network.
•
SD memory card error indicator/AF indicator (SD ERROR/AF) (red): Lights when an error occurred in
the SD memory card. This LED will blink in the process of the auto focus function and blinking will stop
when the focus adjustment is complete. Except when the auto focus is being used, when the indicator
lights or blinks, it indicates that an error occurred in the SD memory card.
–
Indicator lights: Indicates an error occurred in both SD memory card 1 and SD memory card 2.
–
Indicator blinks 1 time in 3 second cycles: Indicates an error occurred in SD memory card 1.
–
Indicator blinks 2 times in 3 second cycles: Indicates an error occurred in SD memory card 2.
•
SD MOUNT indicator (SD MOUNT): Lights when data can be saved to the SD memory card. It blinks
or is off when data cannot be saved to the SD memory card.
48 Operating Instructions