Panasonic WV-SFR631L Operating Instructions Manual page 51

Hide thumbs Also See for WV-SFR631L:
Table of Contents

Advertisement

Refer to page 177 or the "Viewnetcam.com" website (http://www.viewnetcam.com/) for further information.
Default: Off
Note
When the "DDNS" setting is changed, the "DDNS" setting on the [Advanced] tab of the "Network" page
also changes to the same setting.
[Recommended network setting for internet]
The recommended settings for connecting to the Internet are performed here.
By clicking the [Set] button, a dialog displaying how the following settings will change is displayed.
Click the [OK] button after checking the settings to change the settings to the displayed values.
[JPEG/H.264] tab on the "Image/Audio" page
[JPEG(1)]
[Image capture size]: VGA/640x360
[JPEG(2)]
[Image capture size]: QVGA/320x180
[JPEG(3)]
[Image capture size]: 160x120/160x90
[H.264(1)]/[H.264(2)]/[H.264(3)]/[H.264(4)]
[Internet mode (over HTTP)]: On
[Transmission priority]: Best effort
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[H.264(1)]
[Image capture size]: 1280x960/1280x720
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 256 kbps
[H.264(2)]
[Image capture size]: VGA/640x360
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[H.264(3)]
[Image capture size]: QVGA/320x180
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[H.264(4)]
[Image capture size]: 160x120/160x90
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[Network] tab on the "Network" page
[Common]
[Max RTP packet size]: Limited(1280byte)
[HTTP max segment size(MSS)]: Limited(1280byte)
10 Configure the basic settings of the camera [Basic]
Operating Instructions
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-sfv611lWv-sfn611lWv-sfv631lWv-sfn631lWv-sfr611l

Table of Contents