Image Quality - Panasonic WV-SFR631L Operating Instructions Manual

[Burst tolerance level]
Select how much the bit rate can exceed "Max bit rate (per client)*" by from the following.
High/Middle/Low
Default: Low
Note
•
This setting is only available when "Advanced VBR" is selected for "Transmission priority".
[Control time period]
Select the time period that the bit rate will be controlled for from the following. Images are transmitted so that
the average transmission rate during the selected period becomes the bit rate selected for "Max bit rate (per
client)*".
1h/6h/24h/1week
Default: 24h
Note
•
This setting is only available when "Advanced VBR" is selected for "Transmission priority".
[Max bit rate (per client)*]
Select a H.264 bit rate per a client from the following. When "Best effort" is selected for "Transmission
priority", set the maximum and minimum bit rates.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps*/ 6144kbps*/ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*/16384kbps*/20480kbps*/
24576kbps*
•
Default:
–
H.264(1): 4096kbps*
–
H.264(2): 1536kbps*
–
H.264(3): 1024kbps*
–
H.264(4): 512kbps*
* The range of bit rates that can be configured for H.264 bit rates differs depending on the "Image capture
size".
•
160x120 and 160x90: 64kbps - 2048kbps*
•
QVGA, 400x300, VGA, 320x180, and 640x360: 64kbps - 4096kbps*
•
800x600: 128kbps* - 4096kbps*
•
1280x960 and 1280x720: 256kbps* - 8192kbps*
•
1920x1080 and 1600x1200: 512kbps* - 14336kbps*
•
1920x1080 (60fps) and 1280x720 (60fps): 1024kbps* - 24576kbps*
•
2048x1536: 1024kbps* - 24576kbps*
Note
•
The H.264 bit rate is restricted by "Bandwidth control(bit rate)" on the [Network] tab on the "Network"
page (®page 143). For this reason, the bit rate may be lower than the value when any value with an
asterisk (*) on the right is selected.

[Image quality]

Select the image quality of H.264 images from the following.
•
When "Transmission priority" is set to "Constant bit rate" or "Best effort": Low(Motion priority)/
Normal/ Fine(Image quality priority)
•
Default: Normal
Note
•
When "Constant bit rate" or "Best effort" is selected for "Transmission priority", this setting is available.
11 Configure the settings relating to images and audio [Image/Audio]
/ 2048kbps*
SF V 631L SF V 631L SF V 611L SF V 611L
Operating Instructions 85