Panasonic WV-SFR631L Operating Instructions Manual page 55

IMPORTANT
•
If an SD memory card with an SD Speed Class other than 10 is used, 2048x1536 cannot be selected
for the image capture size of JPEG images. If "Dual recording" is selected for "Recording mode", the
"Image saving interval" of JPEG images may be limited to "0.5fps" or lower. Set the maximum combined
bit rate of "H.264(1)", "H.264(2)", "H.264(3)", and "H.264(4)" selected in "Recording format" to the
following.
–
When using single recording: total of up to 6 Mbps
–
When using dual recording: total of up to 3 Mbps
•
If an SD memory card with an SD Speed Class 10 is used, set the maximum combined bit rate of "H.
264(1)", "H.264(2)", "H.264(3)", and "H.264(4)" selected in "Recording format" to the following.
–
When using single recording: total of up to 16 Mbps
–
When using dual recording: total of up to 8 Mbps
Note
•
When "H.264(1)" is selected, the settings for "H.264(1)" on the [JPEG/H.264] tab of the "Image/
Audio" page will be changed to the settings for "H.264(1) & recording".
When "H.264(2)" is selected, the settings for "H.264(2)" on the [JPEG/H.264] tab of the "Image/
Audio" page will be changed to the settings for "H.264(2) & recording".
When "H.264(3)" is selected, the settings for "H.264(3)" on the [JPEG/H.264] tab of the "Image/
Audio" page will be changed to the settings for "H.264(3) & recording".
When "H.264(4)" is selected, the settings for "H.264(4)" on the [JPEG/H.264] tab of the "Image/
Audio" page will be changed to the settings for "H.264(4) & recording".
•
When using the SD memory recording function of a Panasonic network disk recorder, select
"JPEG(1)" for "Recording format" of "Recording stream 1".
•
When "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" is selected for "Recording format", the settings
of the following functions may be corrected.
–
When "Best effort" is selected for "Transmission priority", "Frame rate" is set.
–
When "High" or "Middle" is selected for "Burst tolerance level", "Low" is set.
–
When "2s", "3s", "4s" or "5s" is selected for "Refresh interval", "1s" is set.
•
When "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" is selected for "Recording format", the name of
the saved file will be given automatically.
•
When "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" is selected for "Recording format", the number
of users that can access the camera may be reduced.
•
If "JPEG(1)", "JPEG(2)", or "JPEG(3)" is selected for the "Recording format" of "Recording stream 1",
and "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" is selected for the "Recording format" of
"Recording stream 2", the maximum bit rate that can be selected for H.264 is limited.
[Save trigger]
Select a trigger to save images on the SD memory card from the following.
•
FTP error: Saves images when images have failed to transmit to the FTP server by the FTP periodic image
transmission function. Available only for the "JPEG(1)", "JPEG(2)", or "JPEG(3)" images.
•
Alarm input: Saves images at an alarm occurrence.
•
Manual: Saves images manually.
•
Schedule: Saves images in accordance with the settings for "Schedule" (®page 180). Available only for
the "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" images.
•
Default:
–
Recording stream 1: FTP error
–
Recording stream 2: Alarm input
Note
•
When "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)" is selected for "Recording format", "FTP
error" is unavailable.
10 Configure the basic settings of the camera [Basic]
Operating Instructions 55