Editing Appliance Server Settings - IBM eServer 130 xSeries User Reference Manual

Editing appliance server settings

You can make changes to your appliance server network settings. To change network
settings, do the following:
1. Highlight the appliance icon that you want to change, and click Edit Appliance.
2. Select if you want the network settings assigned by Group, DHCP, or by Static
3. Enter the TCP/IP settings for the appliance server.
4. Click Finish.
40
IBM xSeries 130: User's Reference
Settings. If you select Static Settings, go to step 3. If you select DHCP or
Group go to step 4.
Note: If you select DHCP or Static Settings the appliance server remains in the
group but any changes made to the group are not made to the appliance
server.
IP Address
The IP address assigned to the appliance server.
Subnet Mask
The subnet mask value assigned to the appliance server.
Default Gateway
The IP address for the default gateway assigned to the appliance server
(optional).
DNS Address
The IP address of the Domain Name Server (DNS) assigned to the
appliance server (optional). Up to three entries are available.
Note: If you edit the host name or DNS domain name for the appliance server,
you need to restart the appliance server for the changes to take effect.