Table of Contents
Advertisement
Installing a microprocessor on the model 8654
The model 8654 appliance server comes with one 1 GHZ microprocessor installed.
The following illustration will help you locate the second microprocessor connector on
the system board.
Servers with one microprocessor installed:
•
•
•
Servers with two microprocessors installed:
•
•
Complete the following steps to install a second microprocessor:
Attention: To avoid damage and to ensure proper server operation, review the
following before you install a microprocessor:
•
•
•
Attention: When you handle static-sensitive devices, take precautions to avoid
damage from static electricity. For details on handling these devices, see "Handling
static-sensitive devices" on page 50.
Microprocessor 2
(U79)
Microprocessor 1
(U47)
Microprocessor is installed in microprocessor socket 1 (U47).
Microprocessor supports both the startup and application processes.
A terminator card is installed in microprocessor socket 2 (U79).
One microprocessor is installed in microprocessor socket 1 (U47), and the
second microprocessor is installed in socket 2 (U79).
Both microprocessors share the system load.
Ensure that the microprocessors are the same type, have the same cache size,
and have the same clock speed.
Ensure that the microprocessor internal and external clock frequencies are
identical.
See the ServerProven list at http://www.ibm.com/pc/compat for a list of
microprocessors for use with your server.
Chapter 6. Installing options
65
Advertisement
Table of Contents
