IBM eServer 130 xSeries User Reference Manual page 114

Table 15. Diagnostic error messages.
Code Function
075 Microprocessor
175 System thermal
180 Status display
201 System memory
100
IBM xSeries 130: User's Reference
Result
Failed VRM corresponding to Microprocessor in socket xyz
is defective
(where xyz identifies the microprocessor whose
VRM is causing the error message)
VRM corresponding to Microprocessor in socket ID
xyz is not installed
(where xyz identifies the microprocessor whose
VRM is causing the error message)
Failed Fan # n
(where n is the number of the failing fan)
Temperature sensed on processor board is out of
range
Failed Any failure message
Failed DIMMs in location DIMM n
(where n is the number of the socket that contains
the failing DIMM)
Test setup error: Corrupt BIOS in ROM
Test setup error: Corrupt DMI BIOS, information in
BIOS is not as expected
Text message Action
Replace the VRM.
If the problem remains,
call for service.
Install a VRM.
If the problem persists,
call for service.
Replace the indicated
fan.
Call for service.
Call for service.
1. Reseat the failing
DIMM.
2. If the problem
remains, replace
the DIMM.
If the problem
persists, call for
service.
If your appliance server
does not have the latest
level BIOS installed,
update the BIOS to the
latest level.
If the problem persists,
call for service.