Table of Contents
Advertisement
Table 15. Diagnostic error messages.
Code
Function
264
Magnetic tape
drive
301
Keyboard
302
Mouse
305
Video monitor
102
IBM xSeries 130: User's Reference
Result
Aborted
Test setup error: No tape drive found
Failed
The load/mount test failed for device n on adapter m
(where n is the number of the device and m is the
adapter number)
The self-diagnostic failed for device n on adapter m
(where n is the number of the device and m is the
adapter number)
The unload/eject test failed for device n on adapter
m
(where n is the number of the device and m is the
adapter number)
The unload/eject push button test failed for device n
on adapter m
(where n is the number of the device and m is the
adapter number)
The read/write self-diagnostic failed for device n on
adapter m
(where n is the number of the device and m is the
adapter number)
Failed
On system board keyboard test failed
Failed
On system board pointing device test failed.
Any message
Text message
Action
Check the cable and
power connections to
the drive.
Refer to the information
that is provided with the
tape drive.
If the problem persists,
call for service.
Refer to the information
provided with the tape
drive.
If the problem persists,
call for service.
Insert a new tape
cartridge; then, run the
diagnostic test again.
Refer to the information
that is provided with the
tape drive.
If the problem persists,
call for service.
1.
Verify that the
keyboard cable is
connected.
2.
If the problem
remains, replace
the keyboard cable.
If the problem persists,
call for service.
Replace the pointing
device. If the problem
persists, call for service.
Refer to the information
that comes with the
monitor.
Advertisement
Table of Contents
