Table of Contents
Advertisement
When finished, press F6 to save and return to the main option menu. To return to the
main option menu without saving, press Esc.
To use Dial Out, use the Tab key or the arrow keys to move the cursor to User Profile
to Configure. Then use the Left Arrow key and Right Arrow key to select a User
Profile. Once you have selected a User Profile, you can set the following values:
•
Login ID
•
Password
•
Enable or disable the currently selected entry
•
Number
•
PIN
•
Connection Type (numeric, alphanumeric, serial)
•
Description
•
Dialout Retry Limit
•
Dialout Number Spacing
•
Dialout Retry Delay
When you finish, press F6 to save and return to the main option menu. To return to
the main option menu without saving, press Esc.
General Settings
Use this option to set the identifying name and number for the ASM hardware; set the
time and date of the ASM clock, schedule a time and date for the system to be
automatically powered on, and to specify POST, loader, and operating-system timeout
values or the power off delay value.
The name and number help you identify these systems on your network. The name
and number values can be up to 15 characters in length.
Use the arrow keys and the Tab key to move between the fields. For online help,
press F1. When you have finished entering the values, press F6 to save the values
and return to the main option menu. To return to the main option menu without
saving, press Esc.
Modem Settings
Use this option to configure the modem that is used by your ASM hardware. For more
information, see the documentation that comes with your modem.
Update System Management Firmware
Use this option to update the firmware for the IBM Advanced System Management
processor.
Exit
Use this menu item to exit from the xSeries 130 Advanced System Management
Firmware Update program.
Chapter 5. Advanced System Management for the model 8654
47
Advertisement
Table of Contents
