Major components of the Eserver 325 Type 8835 server
The blue color on components and labels indicates touch points, where a
component can be gripped, a latch moved, and so on.
The following illustration shows the locations of major components in a SCSI
hot-swap hard disk drive model server. An IDE non-hot-swap hard disk drive model
is also available.
Note: The illustrations in this publication might differ slightly from your hardware.
6
IBM Eserver 325 Type 8835: Installation Guide
Microprocessor
heat sink
Microprocessor
Dual inline
memory module
(DIMM)
System board
Air baffle
Microprocessor fans
CD-ROM
drive assembly
Power-cord box
Hard disk drive
fan/air baffle
Power supply
Microprocessor
socket
Heat-sink
retention
module
Hot-swap hard disk
drive SCSI backplane
(SCSI model only)
Filler panel (SCSI model only)
USB option tray
Bezel
(SCSI model only)
Hard disk drive