Changing The Port Name - Sharp AR-P13 Service Manual

4.3.1

Changing the Port Name

The port name can be changed when using the utility for TCP/IP . The default name of the port is "SHA_XXXXXX".
IMPORTANT:
Perform the settings before installing printer drivers for this printer.
(1) Click on [Start], then select [Programs].
(2) Select [IP-P2P], and click on [IP-P2P].
(3) "IP-PeerToPeer Setup" begins.
(4) In the field of "Max Hops for Search", input a value of 0 to 15, to specify the range for the printer to be searched.
• 0:
Searches only the network to which the workstation is directly connected.
• 2 to 14:
Searches the network to which the workstation is directly connected and the networks which are accessible
within 2 routers.
• 15:
Searches all the networks that are connected.
(5) Usually, use the "IP Port Base" as it is. It is the default port number of the print server.
(6) From the "Printer Names", select the port name required to be displayed.
• [based on Serial Number]
To be displayed with the serial number of the network interface.
• [based on IP Address]
To be displayed with the IP address of this printer, which is the default selection.
• [based on DNS Name]
To be displayed with the domain name assigned to this printer when the Domain Server is activated.
• [based on unit name]
To be displayed with the unit name (printer name).
(7) Click on [OK].
4-29