The Setting List Of Map; System - Sharp AR-P13 Service Manual

3.3

The Setting List of MAP

There are some differences in set-up pages that can be started up between in MAP and in WebPage.
Do not change any settings except the NetWare setup pages.
3.3.1

System

System-related settings.
Reset
Factory Defaults
Unit Status
Network Address
Change Password
Initialize the Print Server Card. It can enable the settings. (The printer itself is not initialized.)
Returns to a default setting.
Confirm settings for protocols (Novell NetWare, TCP/IP, or AppleTalk). Settings for each protocol can
be changed in the items of "Protocol group".
Novell NetWare:
File Server
File Server Status
Queue Name
Queue Status
TCP/IP:
IP Address
Subnet Mask
Default Gateway Address
(If necessary)
Base Port Number
DHCP
(Dynamic Host Configuration Protocol)
Banner
AppleTalk
Display a serial number and MAC address of the installed Print Server Card.
Set a password to be used.
Display the server connected.
Display the connection status to the server.
Display a supported queue name.
Display the status of a connected queue.
Display the set IP address.
Display the set subnet mask.
Display the set gateway address.
Do not change the setting in general.
Display DHCP Enable/Disable.
Do not change setting in general.
Display a printer name and zone name that the printer belongs to via
AppleTalk set in this machine.
4-24