Unable To Read Flash Drive; Enabling The Usb Port - Sharp MX-C407P User Manual

Troubleshooting
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Device > Notifications > E‑mail Alerts Setup.
3
From the E‑mail Setup section, configure the settings.
4
Click Save.
Unable to read flash drive
Action
Step 1
Check if the printer is not busy processing another job.
Is the printer ready?
Step 2
Check if the flash drive is inserted into the front USB port.
Note: The flash drive does not work when it is inserted into the
rear USB port.
Is the flash drive inserted into the correct port?
Step 3
Check if the flash drive is supported. For more information, see
"Supported flash drives and file types" on page
Is the flash drive supported?
Step 4
a
Check if the USB port is enabled. For more information, see
"Enabling the USB port" on page
b
Remove, and then insert the flash drive.
Does the printer recognize the flash drive?

Enabling the USB port

From the control panel, navigate to:
Settings > Network/Ports > USB > Enable USB Port
For non-touch-screen printer models, press
30.
133.
to navigate through the settings.
Yes No
Go to step 2. Wait for the printer to
finish processing the
other job.
Go to step 3. Insert the flash drive
into the correct port.
Go to step 4. Insert a supported
flash drive.
The problem is Contact your dealer.
solved.
133