Installing The Printer Driver To Windows Nt 4.0 - Sharp AR-P13 Service Manual

5.3.4

Installing the Printer Driver to Windows NT 4.0

(1) Insert the CD-ROM into the CD-ROM drive of the computer.
(2) Click on [Setup printer driver].
(3) Click on [Install].
(4) Click on [Add Printer].
(5) Setting how the printer is to be controlled:
• My Computer
Select this when this printer is directly connected to the computer via a printer cable and is controlled by this
computer, or when this printer is connected to a peer-to-peer network.
• Network printer server
Select this when this printer is connected to a client-server network and is controlled by the NT server.
(6) Click on [Next].
• When [My Computer] is selected, go to Step 9.
(7) Select this machine, which is shared with network computers, and then click on the [OK].
(8) Click on [Finish].
• If a network printer also uses Windows NT, the printer driver installed in the network computer is copied to your
computer.
(9) Selecting the port to be used, in the [Available ports] screen:
• When the printer is connected to the computer via a printer cable:
Select [LPT1 Local Port].
• When the printer is connected to a peer-to-peer network:
Select the port added in the "Peer-to-Peer Utility" Settings.
(10) Click on [Next].
(11) Click on [Have Disk ... ].
(12) Make sure that [Copy manufacturer's files from] is set with the folder in which the printer driver for Windows NT is
located from the CD-ROM drive.
(13) Click on [OK].
(14) Select the printer to be used, then click on [Next].
(15) If necessary, change [Printer name], then click on [Finish].
(16) Select [Not shared], then click on [Next].
(17) Select whether or not the test page will be printed, then click on [Finish].
(18) After the printer driver is installed, click on [OK] to close the dialog box.
4-34