User Information Setup; Setting Up Options - Sharp AR-P13 Service Manual

5.4

User Information Setup

Setting up user information allows you to view your print jobs easily in "Print Job" menu in WebPage (URL for users), and to
confirm total number of sheets printed per group in "Print Counter" menu in WebPage (URL for an administrator). A group
number and user name displayed in WebPage are entered.
The paper system that is mainly used is also selected.
(1) Insert the CD-ROM into the CD-ROM drive.
(2) Click on [Setup printer driver].
(3) Click on [User Information Setup].
(4) Select the printer on which the user information is set, and click on [Next].
(5) Enter a number in [Group] and a name in [User name].
(6) Select the paper system mainly used (A4 or LETTER).
(7) Click on [Next].
(8) The message indicating that setup of the user information is completed is displayed.
SUPPLEMENT:
User Information is set only for Windows 95/98/NT 4.0/2000. However, for Windows NT 4.0/2000,
only [Group Number] can be set.
5.5

Setting up Options

After installing the printer driver, set the options. If the options, such as the finisher, are installed to this machine, they need
to be added in the printer driver. Other items that can be set in the printer driver vary depending on options setup.
What option is installed to this machine can be confirmed in the "System Configuration" menu in WebPage (URL for users).
For Windows 95/98/NT 4.0/2000
Open the printer driver property, and set items in the [Option] tab. When several printer drivers are installed, set the options
for each printer driver.
For Macintosh
In such case as the PPD file is installed for the first time, proceed to step (3) since the "Installable Options" setting screen
appears after the file is installed.
(1) Select this machine from the "Selector" screen, and click on [Reset].
(2) Click on [Configure].
The "Installable Options" setting screen appears.
(3) Select items according to the options being used currently, and click on [OK].
• Finisher
If the finisher is installed to this machine, select "Installed".
(4) Click on [OK].
The "Installable Options" screen is closed.
(5) Exit the Selector.
4-38