1.2.5
Assigning a Print Queue
(1) Choose [Queues Serviced by Printer] from the [Print Server Configuration] menu.
(2) Defined Printers appears.
(3) Select a created printer from [Defined Printers] and press the [Enter] key.
(4) The assigning queue screen appears.
(5) Press the [Insert] key.
(6) Available Queues appears.
(7) Select a created queue.
•
Up to 10 queues can be selected. When more than one queue is to be selected, the priority must be decided in
advance.
(8) Enter the priority and press the [Enter] key.
(9) The queue is assigned.
•
When assigning more than one queue, repeat steps 5 through 9.
(10) Press the [Esc] key six times.
(11) When [Exit PConsole] appears, choose [Yes] and press the [Enter] key.
SUPPLEMENT:
To install a print server on more than one file server, perform the procedures of NetWare 3.x
Set up: Creating the print queue, Creating the print server, Creating the printer, and Assigning
a print queue for each file server. You must use the same name and password for the print
server (or not password) on all file servers. If you use a password, specify it on each file server
using the Change Password option on the Print Server Information menu of the PCONSOLE
utility.
3-3