Model Type; Mdl Typ - FUTABA 6K Instruction Manual

Model type

MDL TYP

Function
Six swash types are available for helicopters.
Five types of main wings and two types of tail
wings are available for airplanes and gliders.
Functions and mixing functions necessary for each
model type are set in advance at the factory.
1AIL
Aileron１Servo
(CH1)
1AIL
Aileron１Servo
(CH1)
(Normal linkage type)
H-1: each servo linked
t o t h e s w a s h p l a t e
independently.
AIL ：Aileron Servo
ELE ：Elevator Servo
PIT ：Pitch Servo
52
（WING TYPE: GLIDER）
1AIL1FLP
Aileron 1
(CH1)
Flap１Servo
(CH5)
Aileron１Servo
(CH1)
（WING TYPE: AIRPLANE）
1AIL1FLP
Flap１Servo
(CH5)
Aileron 1
(CH1)
Aileron１Servo
(CH1)
（TAIL TYPE）
NORMAL
Rudder
(CH4)
Elevator
(CH2)
(SWSH TYPE: HELICOPTER)
Note: The Model Type function automatically
selects the appropriate output channels,
control functions, and mixing functions for the
chosen model type.
When the Model Type selection command
is accessed, all of the data in the active
memory is cleared (except the following
swash type.) Be sure that you don't mind
losing this data, or back it up to another
memory using the copying functions.
2AIL 2AIL1FLP
Aileron 1
(CH1)
Aileron 6
(CH6)
2AIL 2AIL1FLP
Aileron 6
(CH6)
Ｖ-TAIL
Elevator
Elevator
+Rudder
+Rudder
(CH2)
(CH4)
(Common)
2AIL2FLP
Flap 5
(CH5)
Aileron 6
Aileron 1
(CH6)
(CH1)
Flap１Servo
(CH5)
*2AIL2FLP type can't be used for a
motor glider.
ELEVON
Flap１Servo
(CH5)
Elevon 1
(CH1)
Elevon 2
(CH2)
Flap 3
(CH3)
Aileron 6
(CH6)