Elevator→Flap Mixing; El → Flp - FUTABA 6K Instruction Manual

Elevator → Flap mixing
EL → FLP
Function
This mixing is used when you want to apply
mixing from elevator to flap. Usually, mixing
is such that the flap are lowered by raising the
elevator. When used with Fun Fly and other
aircraft, small loops are possible.
●The up side and down side rates can be
adjusted.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Mixing rate
Activating the function
Switch selection
Switch direction
● Select the setting item
with the Jog key.
Elevator → Flap Mixing
■ Activating the function
① Select the "MIX" item
and then select the ON
or OFF by pressing the
+ key or – key.
● When you do not use a function, set to the
"INH" side.
■ Switch direction
③ Select the "POSI
＋
" by pressing the
+ key or – key at
the ON direction
selection item.
Range：
● 2P SW：NULL, UP, DOWN
● 3 P S W ： N U L L , U P, U P & D W N ,
UP&CNT, CENTER, CNT&DN, DOWN
WING TYPE
② Select
"EL → FLP"
from the menu with the
Jog key.
● Sets the ON/OFF direction of the selected switch.
○ 2P SW：NULL, UP, DOWN
○ 3P SW：NULL, UP, UP&DWN, UP&CNT, CENTER, CNT&DN, DOWN
■ Switch selection
② Select the "SW" item
＋ －
or
■ Mixing rate
④ S e l e c t t h e " R AT E " i t e m a n d
－
then adjust the mixing rate by
or
pressing the + key or – key.
Range：-100 ～ +100% Default：+50%
● When you want to return the set value to the initial
value, press the + key and – key simultaneously.
However, polarity does not return.
● RATE ↑ / ↓ cursor position operates and chooses an
elevator stick.
1AIL 1AIL1FLP 2AIL
③ Open the setting screen by
pressing the Jog key.
Select the
elevator stick .
（Elevator up side rate）
（Elevator down side rate）
● When not using this Function
and then select the
switch by pressing the
+ key or – key.
Range：SwA ～ SwD
(AIRPLANE)
2AIL1FLP ELEVON
CH5
Flap 5
CH2
Elevator
↑ / ↓ with the
select INH. The display of On/
Off is shown when active and
assigned to a switch.
＋ －
or
＋ －
or
109