Throttle Curve - FUTABA 6K Instruction Manual

Throttle curve

THR CRV
Function
This function sets a 5 point throttle curve so
that the motor speed relative to movement of the
throttle stick is the optimum value for flight.
●A curve can be set for each switch position.
When this function is set, the throttle EXP function cannot be used.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Activating the function
Switch selection
5 point curve
● Select the setting item
with the Jog key.
Throttle curve
■ Activating the function
① Select the "MIX" item
a n d t h e n s e l e c t t h e
"ON" by pressing the +
key or – key.
● When you do not use a function, set to the
"INH" side.
■ 5 point curve set
③ By Jog key, either of P-1 to P-5 is chosen. The + key or - key is pressed and a
rate is set up.
Default：P-1: 0%, P-2: 25%, P-3: 50%, P-4: 75%, P-5: 100%
② Select
from the menu with the
Jog key.
set
＋ －
or
Range：0 ～ 100%
③ Open the setting screen by
"THR CRV"
■ Switch selection
② Select the "SW" item
and then select the
switch by pressing the
+ key or – key.
Range：SwA ～ SwD Default：SwC
(MULTICOPT)
pressing the Jog key.
● When not using this function,
select INH.
● The set-up curve is shown
（Present switch position）
＋ －
or
＋ －
or
155