Table 5-2. Crs-316 Jumper 'Jp1' Settings; Table 5-3. Crs-316 Jumper 'Jp2' Settings; Table 5-4. Crs-316 Jumper 'Jp3' Through - 'Jp6' Settings - Comtech EF Data CRS-300 Installation And Operation Manual

CRS-300 1:10 Redundancy Switch
Modem, RMI/TMI, and Switch Configuration
Modem
CDM-625
CDM-625
SLM-5650A
Modem
CDM-625
CDM-625
CDM-625
SLM-5650A
Table 5-4. CRS-316 Jumper 'JP3' through – 'JP6' Settings
Modem
CDM-625
SLM-5650A

Table 5-2. CRS-316 Jumper 'JP1' Settings

User Interface Jumper 'JP1'
Control Signal Setting
CS_B & RS_B Signals
Not Connected
CS_B to RS_B
Loop Connected
at User DB-25 Connector
CS_B & RS_B
Routed to online modem

Table 5-3. CRS-316 Jumper 'JP2' Settings

User Interface Jumper 'JP2'
Control Signal Setting
CS_A/CTS & RS_A/RTS
Not Connected
CS_A/CTS & RS_A/RTS
Loop Connected
at User DB-25 Connector
RTS
Controls online modem's Tx
IF mute operation
CS_A/CTS & RS_A/RTS
Routed to online modem
User Interface Jumpers 'JP3' through 'JP6'
Control Signal Setting
DM/DSR, CS , RS, CS/CTS,
RS/RTS, DM/DSR
Not Connected
DM/DSR, CS , RS, CS/CTS,
RS/RTS, DM/DSR
Routed to Traffic modem
Jumper Settings
Detail
Jumper Settings
Detail
Jumper Settings
Detail
5–12
Revision 16
MN/CRS300.IOM
Pin Settings
N/A
(Note: TMI as shipped)
Pin 1 to Pin 3
Pin 1 to Pin 2;
Pin 3 to Pin 4
Pin Settings
N/A
(Note: TMI as shipped)
Pin 1 to Pin 3
Pin 3 to Pin 5
Pin 1 to Pin 2;
Pin 3 to Pin 4
Pin Settings
N/A
(Note: TMI as shipped)
Pin 1 to Pin 2;
Pin 3 to Pin 4