Select: Store/Ld (Store Or Load Configuration); Store/Ld: Store; Store/Ld: Load - Comtech EF Data CRS-300 Installation And Operation Manual

CRS-300 1:10 Redundancy Switch
Front Panel Operation
7.7

SELECT: STORE/LD (Store or Load Configuration)

STORE/LOAD CONFIG:
STORE
Select STORE or LOAD using the ◄ ► arrow keys, then to press
the User to store or load up to 10 different Switch configurations in its non-volatile memory.
NOTE: These are configurations for the Switch itself, not the modems to which it is attached.

7.7.1 STORE/LD: STORE

STORE CONFIGURATION TO
LOCATION: 10
Select the location, using the ▲ ▼ arrow keys, to where the current configuration is to be stored,
then press [ENT]
previously stored configuration, the following display appears:
YOUR CONFIGURATION HAS
BEEN STORED!
Press or
[ENT] [CLR]
previously stored configuration, the following display appears:
WARNING!
DATA!
Select NO or YES using the ◄ ► arrow keys, then to press
the existing configuration at the selected location.

7.7.2 STORE/LD: LOAD

LOAD CONFIGURATION FROM
LOCATION: 10
Select the location to load a configuration from, using the ▲ ▼ arrow keys, then to press
Locations 1 through 10 are available. If the selected location contains valid data, the following
display appears:
THE NEW CONFIGURATION
HAS BEEN LOADED
Press or
[ENT]
contain valid data, the following screen display appears:
WARNING! LOC 10 CONTAINS
NO DATA!
Press or
[ENT] [CLR]
LOAD (PRESS ENTER)
(ENTER)
. Locations 1 through 10 are available. If the selected location does not contain a
(ENTER)
to return to the previous menu. If, however, the selected location contains a
LOC 10 CONTAINS
OVERWRITE? NO
(ENTER)
(ENTER)
to return to the previous menu. If, however, the selected location does not
[CLR]
(ENTER)
to return to the previous menu.
YES
[ENT]
7–19
Revision 16
MN/CRS300.IOM
. These submenus permit
[ENT]
. Selecting YES will overwrite
.
[ENT]