Xantrex 807-1055 Owner's Manual page 46

Freedom HFS IC Owners Guide.book Page 32 Friday, September 11, 2015 2:54 PM
Warning Messages
For error code :
• the display screen and the alarm will turn off after 30 seconds
• after a five-minute shutdown delay, the unit will immediately
stop inverting
For error codes  to :
• the unit will stop inverting
For error codes :
• the unit will stop charging, but
• the error code will still show on the display screen and the
alarm will remain on, and
• AC power will continue to pass through to the AC outlets
For error code 
• the unit will stop charging and shut down, and
• the error code will show on the display screen briefly, and
• AC power will not pass through to the AC outlets
To reset error codes  and :
1. Remove the AC input.
2. Turn the unit OFF and then turn ON again using the Inverter
Power button on the display panel.
32 Freedom HFS Owner's Guide