Freedom HFS IC Owners Guide.book Page 1 Friday, September 11, 2015 2:54 PM
Introduction
The Freedom HFS Sine Wave Inverter/Charger (Freedom HFS) is
designed with integrated inverting–charging functions and power
management features suitable for marine, recreational, and
commercial vehicle installations.
Please read this chapter to familiarize yourself with the main
performance and protection features of the Freedom HFS.
Materials List
The Freedom HFS base package includes the minimum following items:
•
one Freedom HFS unit
•
one set of owner's and installation guides
•
one display panel with 7-inch (0.17 m) cable
•
one 25-foot (7.5 m) communications cable
•
two DC terminal covers
•
two strain-relief bushings
•
one GFCI cover plate
•
one pair AC compartment cover plates
•
one display panel blanking plate (not shown)
•
one display panel mounting bezel (not shown)
•
one set of lock washers and nuts (not shown)
NOTE: If any of the items are missing, contact Xantrex or any
authorized Xantrex dealer for replacement. See "Contact
Information" on page i.
Other Freedom HFS OEM models may include other DC and/or AC
connectors.
975-0727-01-01
Freedom HFS unit
Freedom HFS 1055
120VAC shown.
Owner's and Installation
Guides
communications
DC terminal
GFCI cover
cable
covers
plate
Figure 1 What's In The Box
Display panel is
attached to the unit.
Product image shown may vary from actual
product. See "Features" for comparisons.
AC compartment
strain-relief
cover plates
bushings
1