Xantrex 807-1055 Owner's Manual page 20

Freedom HFS IC Owners Guide.book Page 6 Friday, September 11, 2015 2:54 PM
Features
Rear Panel (EMS Models)
2
1
Feature Description
1 Negative DC cabling terminal that is pre-connected to an 18-inch (0.45m)
a
battery cable with an Anderson
2 Ventilation grille (openings) must not be obstructed for the proper operation
of the cooling fan and inverter. When the inverter is mounted, the ventilation
grille must not point up or down.
Positive DC cabling terminal that is pre-connected to an 18-inch (0.45m)
3
a
battery cable with an Anderson connector.
4 Serial number of your unit.
a. Freedom HFS 1055 120VAC EMS has a cable size of 2 AWG with SB175 Anderson con-
nector and Freedom HFS 2055 120VAC EMS has a cable size of 2/0 AWG with SB350 An-
derson connector.
b. Anderson Power Products® manufactures power interconnects and accessories. An Ander-
son connector is a term used in this manual to mean a connector manufactured by Anderson
Power Products and refers to either SB175 or SB350.
6
3
4
b
connector.
Rear Panel (All Other Models)
2
1
Freedom HFS 1055 shown
Feature Description
1 Negative DC cabling terminal connects to the negative terminal of the
battery using a battery cable.
2 Ventilation grille (openings) must not be obstructed for the proper operation
of the cooling fan and inverter. When the inverter is mounted, the ventilation
grille must not point up or down.
3 Positive DC cabling terminal connects to the positive terminal of the battery
using a battery cable.
4 Serial number of your unit.
3
4
Freedom HFS Owner's Guide