Xantrex 807-1055 Owner's Manual page 25

Freedom HFS IC Owners Guide.book Page 11 Friday, September 11, 2015 2:54 PM
Adjusting Feature Settings
The Power and Select buttons can be used to:
• change the charging current setting
• change the inverter mode setting
• disable or enable the audible alarm
• change the shutdown setting
• change the battery type setting
• change custom () voltage setting
• return to factory default settings
Inverter
Power button
Status
LED light
Info and Settings LED lights
Figure 2 Display Panel
a.Possible only when the Battery Type setting is set to .
975-0727-01-01
To cycle through the various feature settings:
1.
2.
Setting
a
Charging Current Setting
Inverter Mode Setting
Alarm Setting
Shutdown Setting
Battery Type Setting
LED
screen
Custom Voltage Setting
Factory Setting
a. Appears only when the Battery Type setting is set to .
Freedom Inverter/Charger Configuration
Press and hold the Inverter Power button for five seconds to
enter the feature settings mode.
Press the Inverter Power button to toggle between the following
information:
LED Screen






a

11