Table of Contents
Advertisement
CHECKING THE ENGINE OIL LEVEL
With the engine at operating temperature and turned off,
check the oil level on the dipstick.
1. To get a correct reading, the vehicle should be on level
ground. After turning off the engine, wait a few minutes for the
oil to drain back into the bottom of the engine.
2. Pull the dipstick out, hold a rag under the end and wipe it
clean.
3. Reinsert the dipstick and push it in as far as it will go, or the
reading will not be correct.
"
1
Add oil
4. Pull the dipstick out and look at the oil level while holding a
rag under the end. If it is between the low level mark (
the full level mark (
Be careful not to drop engine oil on the vehicle
components.
I n f o r ma t i o n P r o v i d e d b y :
ENGINE
2
O.K.
3
Too full
4
5
), it is O.K.
NOTICE
) and
511
Advertisement
Table of Contents
