Table of Contents
Advertisement
" Security indicator light
Setting the system
1. Turn the ignition key to the "LOCK" position and
remove it.
The engine immobilizer system causes the indicator light to
flash.
2. Close and lock all the doors and hood using an ignition
key or wireless remote control.
If you lock them with wireless remote control, the turn signals
flash once.
The flashing indicator light will remain on when all the doors
and hood are closed and locked.
3. After 30 seconds, the indicator starts flashing and the
system is set.
Cancelling the system
When you unlock any door using an ignition key or
wireless remote control, the system is cancelled.
If you unlock any door with wireless remote control, the turn
signals flash twice.
Activating the system
The alarm sounds for 60 seconds if any of the following are
operated:
D Unlocking any door without using an ignition key or wireless
remote control.
D Opening the hood and any doors forcibly.
D Reconnecting the battery.
If the battery becomes discharged due to the vehicle being
unused for a long time, etc., when the battery is recharged or
replaced, the system will give the alarm. If this happens,
immediately unlock any of the doors with the key or the
wireless remote control, and the alarm will stop.
If any door is unlocked and the ignition key is not in the ignition
switch during the alarm sounding, its door is automatically
locked.
To stop the alarm: Use either of the following methods.
D Unlock the door using an ignition key or wireless remote
control.
D Turn the ignition switch on.
I n f o r ma t i o n P r o v i d e d b y :
KEYS AND DOORS
27
Advertisement
Table of Contents
