Table of Contents
Advertisement
IN CASE OF AN EMERGENCY
To remove the spare tire:
1. Open the back door and remove the spare tire
carrier lid using a flat bladed screwdriver.
2. Insert the end of the jack handle extension into the
lowering screw and put a cloth between the jack
handle extension and rear bumper to protect the
bumper surface.
3. Turn the jack handle counterclockwise until the
spare tire completely lowered to the ground. Make
sure the handle remains firmly fitted onto the jack
handle extension.
436
Vehicles with kinetic dynamic suspension system —
When lowering the spare tire, make sure the spare
tire does not to interfere with the suspension
components. If interference occurs, raise the spare
tire, and pull it toward the rear of the vehicle, and
start again.
4. After the tire is lowered completely to the ground,
remove the holding bracket.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
