Table of Contents
Advertisement
Hitches
D If you wish to install a trailer hitch, you should consult with
your Lexus dealer.
D Use only a hitch recommended by the hitch manufacture
and the one which conforms to the total trailer weight
requirement.
D If you wish to install an aftermarket hitch, the hitch must be
bolted securely to the vehicle frame and installed according
to the hitch manufactures' instructions.
D The hitch ball and king pin should have a light coat of grease.
D Lexus recommends the ball mount assembly be removed
when not towing to prevent injury and to prevent damage in
the event of a rear end collision. After removing the ball
mount assembly, install the grommet to the hitch to prevent
entry of dirt and mud.
Do not use axle mounted hitches as they can cause
damage to the axle housing, wheel bearings, wheels or
tires. Also, never install a hitch which may interfere with
the normal function of an Energy Absorbing Bumper.
Trailer ball
Follow these easy steps to properly determine the correct
trailer ball for your application:
1. Determine the correct trailer ball size for the trailer coupler.
Most couplers are stamped with the required trailer ball size.
The sizes you'll most likely find stamped on the coupler are:
Trailer Class
III
II
I
2. Select the appropriate trailer ball to match or exceed the
gross trailer weight rating of the trailer. The trailer ball load
rating should be printed on the top of the ball.
I n f o r ma t i o n P r o v i d e d b y :
DRIVING TIPS
NOTICE
Typical Trailer Ball Size
2
in.
2
in.
1 7/8 in.
409
Advertisement
Table of Contents
