Table of Contents
Advertisement
NOTICE
Do not pull or push start the vehicle. It may damage
the vehicle or cause a collision when the engine starts.
Also the three way catalytic converter may overheat
and become a fire hazard.
If the engine turns over at its normal speed but will not
start —
1. Turn the ignition key to "ACC" or "LOCK" and try starting the
engine again.
2. The engine may be flooded because of repeated cranking.
See "(b) Starting a flooded engine" for further instructions.
3. If the engine still will not start, it needs adjustment or repair.
Call a Lexus dealer, Roadside Assistance or Customer Service
Assistance. (See "Foreword".)
(b) Starting a flooded engine
If the engine will not start, your engine may be flooded
because of repeated cranking.
If this happens, turn the ignition key to "START" with the
accelerator pedal fully depressed, and hold the key at this
position for about 30 seconds. Then the cranking hold function
stops cranking automatically, and you can try starting the
engine with your foot off the accelerator pedal.
If the engine does not start, wait a few minutes and try again.
If the engine still will not start, it needs adjustment or repair.
Call a Lexus dealer, Roadside Assistance or Customer Service
Assistance. (See "Foreword".)
(c) Jump starting
To avoid serious personal injury and damage to your
vehicle which might result from battery explosion, acid
burns,
electrical
components, these instructions must be followed
precisely.
If you are unsure about how to follow this procedure, we
strongly recommend that you seek help from your Lexus
dealer, Roadside Assistance or Customer Service Assistance.
(See "Foreword".)
I n f o r ma t i o n P r o v i d e d b y :
IN CASE OF AN EMERGENCY
burns,
or
damaged
electronic
427
Advertisement
Table of Contents
